Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download

Page 235 of 788

TM 9-2350-261-34 REPAIR FAN — Continued 0027 00 NOTE Make sure two pins (13) are installed in support (2) before doing Step 6. 6. Install housing (11) and shaft (9) in gearbox (1). 7. Secure housing (11) to support (2) with three new key washers (14) and screws (15). 8. TIGHTEN THREE SCREWS (15) TO 252-300 LB -IN (28-34 N·M) TO RQU E. Use torque wren ch. 9. Install key (16) and fan (17) on shaft (18) of gearbox (1). Secure with new washer (19) and nut (20). 10. TO SET ROTOR AND SEAL, TIGHTEN NUT (20) TO 70-75 LB-FT (95-102 N·M) TORQUE. Then loosen nut. Use torque wrench. 0027 00-5