TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 227 of 788
REPAIR RADIATOR — Continued RODDING 1. Heat melt and wire brush off the solder that secures two side brackets (1) and (2) to two end tanks (3) and (4). 2. Heat melt and wire brush off the solder that secures two end tanks (3) and (4) to core (5). 3. Wire brush rust, scale, and sediment from core tube openings (1). 4. Locate plugged tubes (1) by directing water into tubes. Check for flow at opposite end. 5. Insert a metal rod (2) long enough and slightly smaller in diameter than tubes (1) through tubes to remove blockage. 6. Clear tubes (1) until water flows through freely. 0025 00-5 0025 00 TM 9-2350-261-34