TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 226 of 788
TM 9-2350-261-34 REPAIR RADIATOR — Continued 0025 00 REPAIR 1. Re-solder cracked solder joints and splice damaged tubes. If necessary to repair tube damage near end tanks, disassemble radiator. See RODDING, Steps 1 - 2 . 2. Tube splicing shall be limited to no more than two tubes adjacent to the core face on either side. 3. Removed areas of fin shall not exceed 6-1/2 square inches (42 sq cm) per side, per any tube repair. Length of tube splice shall not exceed 2 inches (5 cm). Tube blockage is not allowed. 4. Heat solder repair of the upper and lower tanks, side brackets, and inlet and outlet openings is allowed. 5. Heat soldering of a core shall not exceed a linear length of 8 inches (20 cm) for any one core assembly. 6. Fin straightening is allowed. 0025 00-4