TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 196 of 788
TM 9-2350-261-34 REPLACE ENGINE — Continued 0021 00 WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 13. Apply a thin, even coat of primer and then sealing compound to cleaned external pipe threads of elbows (11), nipple (12), tee (13), elbow (14), and elbow (15). Do not apply primer or sealant beyond small end of threads. 14. Install two elbows (11) in engine block. 15. Connect two engine oil filter hoses (16) to two elbows (11). 16. Install oil cooler nipple (12) in engine oil cooler housing. 17. Connect tee (13) with elbow (14) to oil cooler housing nipple (12). 18. Install transmission oil temperature sending unit (17) to tee (13). TIGHTEN OIL TEMPERATURE SENDING UNIT TO 240 -3 00 LB -IN (2 7-34 N ·M) TO R QUE. U se torque wrench. 19. Install elbow (15) in engine oil cooler housing. 20. Connect two transmission oil hoses (18) to two elbows (15) and (14). 0021 00-22