TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 172 of 788
TM 9-2350-261-34 REPLACE TRANSFER GEARCASE — Continued 0020 00 ASSEMBLY 1. Place new gasket (26) on differential oil pump (22). 2. Install differential pump (22) with key (28) and retaining ring (27) in secondary pump drive gear (23). 3. Apply a thin coat of antiseize compound to cleaned threads of two screws (24). 4. Install differential oil pump (22) on transfer gearcase. Secure with two screws (24) and new key washers (25). TIGH TEN S CREW S TO 42 0-4 80 LB-IN (47-54 N·M) TO RQU E. Use torque wrench . 5. Install differential pump (22) on drive gear (23). Secure with washer (21), nut (20), and new cotter pin (19). 6. Install ramp pump (16) and new gasket (18) in flange (11). Secure with four screws (17) and retaining ring (15). 7. Install coupling (14) on secondary pump drive gear (13). 8. Place new packing (12) on flange (11). 9. Install ramp pump (16) shaft in coupling (14). 10. Install flange (11) on transfer gearcase. Secure with two screws (9) and new key washers (10). TIGHTEN SCREWS TO 144 -1 80 LB -IN (1 6-20 N·M) TO R QUE. Use torque wrench. 0020 00-4