TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 164 of 788
TM 9-2350-261-34 REMOVE/INSTALL TRANSFER GEARCASE — Continued 0019 00 INSTALLATION 1. Apply a thin coat of antiseize compound to cleaned threads of 12 screws (1), (3), and (5) removed. 2. Attach a lifting device of at least 200 lb (91 kg) capacity to transfer gearcase. Have helper assist. 3. Align transfer gearcase with engine. Have helper assist. 4. Install two screws (5) and washers (6). 5. Install one long screw (3) and washer (4). NOTE If pump has been replaced, follow Steps 7 - 9. 7. Install new packing (19) and elbow (11) in differential oil pump (18). 8. Install nut (15) on elbow (14). 9. Install new packing (17), retainer (16), and elbow (14) in differential oil pump (18). 10. Install new packing (13) and quick disconnect half (12) on elbow (14). 0019 00-6 6. Secure transfer gearcase to engine with nine screws (1) and washers (2). TIGHTEN ALL 12 SCREWS TO 252-300 LB-IN (28-34 N·M) TOR QUE. U se torque wrench. LO O SEN AND RETIGHTEN TO 25 2-3 00 LB-IN (28-34 N·M) TORQUE. Use torque wrench.