TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 159 of 788
TM 9-2350-261-34 REMOVE/INSTALL TRANSFER GEARCASE 0019 00 THIS WORK PACKAGE COVERS: Removal (page 0019 00-1). Installation (page 0019 00-6). INITIAL SETUP: M a i n t e n a n c e L e v e l Direct Support T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0104 00, Item 19) Torque Wrench (WP 0104 00, Item 58) Lifting Device 200 lb (91 kg) Capacity M a t e r i a l s / P a r t s Antiseize compound (WP 0105 00, Item 5) Cotter pin Key washer (5) Packing (3) P e r s o n n e l R e q u i r e d Track Vehicle Repairer 63H10 Helper (H) R e f e r e n c e s See your -20 E q u i p m e n t C o n d i t i o n Power plant removed (see your -20) Power plant blocked (WP 0015 00) Transmission removed from transfer gearcase (WP 0016 00) REMOVAL C A U T I O N Cap or cover openings where fuel oil, coolant, or hydraulic lines or fittings have been removed. NOTE If you need to replace the engine, transmission, or transfer gearcase, drain the oil from each BEFORE power plant is removed from carrier. 1. Drain hydraulic system (see your -20). 2. Remove screw (1), key washer (2), and clamp (3) that secure hydraulic hose (4) to transfer gearcase. Discard key washer. 0019 00-1