TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 158 of 788
TM 9-2350-261-34 REPLACE TRANSFER GEARCASE PULLEY (M577A2 WITH 200 AMP GENERATOR ONLY) — Continued 0018 00 INSTALLATION 1. Install new seal (8) on drive bearing plate (9). 2. Install snap ring (10), two retaining rings (11), two bearings (12), and spacer (13) on drive bearing plate (9). Use retaining ring pliers and snap ring pliers. 3. Install plug (6) and drive pulley (7) on drive bearing plate (9). C A U T I O N Align oil hole in housing with oil hole in case. 4. Install new preformed packing (5) and shim (4) in transfer gearcase (3). FOLLOW-THROUGH STEPS 1. Install generator drive belt (see your -20). END OF TASK 0018 00-2 5. Align drive pulley assembly on transfer gearcase (3). Secure with four new key washers (2) and cap screws (1). TIGHTEN SCREWS TO 252-300 LB-IN (28-33 N·M) TORQUE. Use torque wrench.