TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 156 of 788
TM 9-2350-261-34 REPLACE TRANSMISSION — Continued 0017 00 WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 6. Apply a thin, even coat of primer and then sealing compound to cleaned external threads of elbows (1). Do not apply primer or sealing compound beyond small end of threads. 7. Install two new packings (2) and elbows (1) in transmission. 8. Position range selector arm (14) on transmission shaft (11) with offset side of arm toward transmission and clamping screw hole aligned with flat on shaft. Secure with screw (13) and nut (12). 9. Position throttle valve arm (10) on transmission shaft (11) with offset side of arm away from transmission and clamping screw hole aligned with flat on shaft. Secure with screw (9) and new locknut (8). FOLLOW-THROUGH STEPS 1. Install transmission on transfer gearcase (WP 0016 00). 2. Install power plant in carrier (see your -20). 3. Fill transmission (see your -10). END OF TASK 0017 00-4