TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 115 of 788
TM 9-2350-261-34 PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS), INCLUDING LUBRICATION INSTRUCTIONS 0014 00 THIS WORK PACKAGE COVERS: General M aintenance Instructions (page 0014 00-1). Preventive M aintenances Checks a nd Serv ices Including Lub rication I nstruction s (page 0014 00-14 ). INITIAL SETUP: M a i n t e n a n c e L e v e l Direct Support M a t e r i a l s / P a r t s Crocus cloth (WP 0105 00, Item 9) Detergent (WP 0105 00, Item 12) Solvent, cleaning compound (WP 0105 00, Item 10) Wiping rag (WP 0105 00, Item 28) R e f e r e n c e s See your -10 See your -20 TM 9-214 TM 9-2350-261-24P TC 9-237 TM 43-0139 GENERAL MAINTENANCE INSTRUCTIONS Scope This section contains safety warnings, guidelines, and general maintenance instructions. They should be followed when doing maintenance procedures authorized for direct and general support maintenance levels. Preparation for Maintenance 1. PERSONNEL SAFETY. Practice all shop safety procedures and read all warnings in this manual. 2. PROPER EQUIPMENT. Get tools and equipment before starting a maintenance task. See TM 9-2350-261-24P and the maintenance tasks for tools, equipment, parts, and materials. 3. WHAT TO DISCARD. Parts to discard, such as lockwashers, locknuts, and gaskets are listed in the maintenance tasks. If the step does not say to discard a part, the part should be saved. It may be used later, or repaired. 4. HANDLING TECHNIQUES. a. Avoid damage to parts during disassembly, cleaning, inspection, repair, and reassembly procedures. Nicks, scratches, and dents caused by careless handling could result in equipment failure. b. Dirt can damage parts and cause malfunctions. Make sure all air and fluid openings, lines, and hoses are capped or plugged during maintenance procedures. 5. IDENTIFICATION. a. During disassembly, tag parts to ensure proper assembly. b. During disassembly, tag leads on electrical parts to ensure proper assembly. Tag each lead, as it is removed, with numbers from wiring diagrams and terminals. 0014 00-1