TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 113 of 788
TM 9-2350-261-34 SERVICE UPON RECEIPT 0013 00 THIS WORK PACKAGE COVERS: Service Upon Receipt of Materiel (page 0013 00–1). INITIAL SETUP: M a i n t e n a n c e L e v e l Direct Support T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0104 00, Item 19) P e r s o n n e l R e q u i r e d Track Vehicle Repairer 63H10 R e f e r e n c e s See your -10 See your -20 TM 9-6140-200-14 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) SERVICE UPON RECEIPT OF MATERIEL Checking Unpacked Equipment This section provides information on how to check and service your carrier when it is received. Level B and A deprocessing procedures are given in the following table. Level B deprocessing is performed when the carrier has been in storage for less than 90 days. Level A deprocessing is performed, in addition to Level B deprocessing, when the carrier has been in storage for more than 90 days. 0013 00-1 Install cables on battery. See your -20. Battery cables Hull SERVICE UPON RECEIPT (1) Remove shipping tape from filler caps. (2) Add electrolyte and charge batteries. See TM 9-6140-200-14. Carrier batteries LOCATION Hull ITEM ACTION Install power plant access panels. REMARKS Power plant access panels Engine LEVEL B Remove caps and plugs from all openings to engine that vent outside. Caps and plugs Engine Hull Driver’s hatch Remove shipping tape from oil filter cap. Oil filter cap Engine Remove shipping tape from oil level gauge rod opening. Oil level gauge Engine Remove shipping tape from crankcase breather. R emove welded n ut/bolt from driver ’s h atch to gain carrier en try. Crankcase Engine Engine (1) Connect fuel lines at quick disconnect. (2) Connect fuel supply tubing. Fuel lines Engine air intake Engine (1) Remove air restrictor plug from air duct at air filter. (2) Connect filter hose to air filter. (3) Remove warning tag.