TM-9-2350-261-24P Repair Parts Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 24 of 1184
SECTION I TM 9-2350-261-24P 6 (1) CAGE column . The Commercial and Government Entity (CAGE) code is a 5-digit numeric code used to identify the manufacturer, distributor, or Government agency, etc., that supplies the item. (2) PART NUMBER column . Indicates the primary number used by the manufacturer (individual, firm, or corporation, or Government activity), which controls the design and characteristics of the item by means of its engineering drawings, specifications standards, and inspection requirements to identify an item or range of items. (3) STOCK NUMBER column . This column lists the NSN for the associated part number and manufacturer identified in the PART NUMBER and CAGE columns to the left. (4) FIG. column . This column lists the number of the figure where the item is identified/located in Section II and III. (5) ITEM column . The item number is that number assigned to the item as it appears in the figure referenced in the adjacent figure number column. 5. Special Information . a. USABLE ON CODE . The usable on code appears in the lower left corner of the Description column heading. Usable on codes are shown as “UOC…” in the Description Column (justified left) on the first line following the item description/nomenclature. Uncoded items are applicable to all models. Identification of the usable on codes used in the RPSTL are: Code Used On V35 M113A2 Carrier, Personnel V37 M577A2 Carrier, Command Post 011 M901A1 Combat Vehicle, Anti-Tank, Improved TOW Vehicle 056 M1059 Carrier, Smoke 120 M1064 Carrier, Mortar, 120 mm Mortar ACP V83 M1068 Carrier, SICPS M981 Carrier, Fist V b. FABRICATION INSTRUCTIONS . Bulk materials required to manufacture items are listed in the Bulk Material portion of this RPSTL. Part numbers for bulk materials are also referenced in the description column of the line item entry for the item to be manufactured/fabricated. Detailed fabrication instructions for items source coded to be manufactured or fabricated are found in TM 9-2350-261-20-1. c. ASSEMBLY INSTRUCTION . Detailed assembly instructions for items source coded to be assembled from component spare/repair parts are found in TM 9-2350-261-20-1 and TM 9-2350-261-34. Items that make up the assembly are listed immediately following the assembly item entry or reference is made to an applicable figure. d. KITS . Line item entries for repair parts kits appear in a group in Section II (see table of contents). e. INDEX NUMBERS . Items which have the word BULK in the figure column will have an index number shown in the item number column. This index number is a cross-reference between the National Stock Number/Part Number index and the Bulk Material list in Section II. f. ASSOCIATED PUBLICATIONS . The publication(s) listed below pertain to Personnel Carriers M113A2, M577A2, M1059, M901A1, M1064, and M1068 vehicles and their components.