TM-9-2350-261-20-4 Unit Maintenance Manual Volume 4 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 637 of 788
TM 9-2350-261-20-4 COMMON TOOLS AND SUPPLEMENTS AND SPECIAL TOOLS/FIXTURES LIST 0780 00 INTRODUCTION Scope This work package lists all common tools, supplements and special tools/fixtures needed to maintain the M113A2, M577A2, M901A1, M1059, M1064, and M1068 carriers. Common and special tools for the 120-mm (4.7-inch) M298 mortar, mortar mounts, and turntables are listed in TM 9-1015-250-23. Explanation of Columns Column (1) — Item Number. This number is assigned to the entry in the listing and is referenced in the Initial Setup section of the task under Tools to identify the item (e.g., “Torque wrench, (WP 0780 00, Item 105)”). Column (2) — Name. This column lists the item by noun nomenclature and other descriptive features (e.g., “Wrench set, socket, 1/4 inch drive”). Column (3) — National Stock Number. This is the National Stock Number (NSN) assigned to the item; use it to requisition the item. Column (4) — Part Number. Indicates the primary number used by the manufacturer (individual, company, firm, corporation, or Government activity), which controls the design and characteristics of the item by means of its engineering drawings, specifications, standards, and inspection requirements to identify an item or range of items. Column (5) — Reference. This column identifies the authorizing Supply Catalog (SC) or Repair Parts and Special Tools List (RPSTL) for items listed in this appendix. Table 1. Tool Identification List (1) (2) (3) (4) (5) ITEM NO. ITEM NAME NATIONAL STOCK NUMBER PART NUMBER REFERENCE 1 ADAPTER 5120-00-933-8458 11592843 TM 9-2350-261-24P 2 ADAPTER, SPDL, SANDER 5130-00-293-2330 CP-50 SC4910-95-CL-A74 3 ADAPTER, SOCKET, TORQUE 5120-00-227-8088 A-A-2172 SC4910-95-CL-A72 4 ADAPTER, SOCKET, TORQUE, 1/2 TO 3/8 INCH DRIVE 5120-00-240-8703 A-A-2172 SC4931-95-CL-A22 5 ADAPTER, SOCKET, WRENCH, 3/4 X 1/2 INCH 5120-00-144-5207 11655788-3 SC4931-95-CL-A22 6 ADAPTER, TORQUE WRENCH, 7C U-JOINT 5120-00-213-6976 11663358-1 TM 9-2350-261-24P 7 ADAPTER, TORQUE WRENCH, 6C U-JOINT 5120-00-215-8200 11663358-2 TM 9-2350-261-24P 8 ADAPTER, TORQUE WRENCH, 1/2 INCH DRIVE 9/16 INCH 5120-00-977-7421 10917666 TM 9-2350-261-24P 9 ADAPTER, TORSION BAR 5120-01-017-5328 12251805 TM 9-2350-261-24P 10 ADJUSTING TOOL, STEER CENTERING 2530-01-249-6439 J35223 TM 9-2350-261-24P 11 BAR, LIFTING, FINAL DRIVE 5120-00-918-0586 11589384 TM 9-2350-261-24P 0780 00-1