TM-9-2350-261-20-4 Unit Maintenance Manual Volume 4 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 630 of 788
TM 9-2350-261-20-4 MAINTENANCE ALLOCATION CHART (MAC)—Continued 0779 00 0779 00-30 EQUIPMENT REF CODE MAINTENANCE LEVEL NOMENCLATURE NATIONAL STOCK NUMBER TOOL NUMBER 36 H TESTER, INJECTOR: USED W/4910- 00-355-6248 4910-00-255-8641 3YFL-05008 37 H ADAPTER, NEEDLE VALVE: USED W/4910-00-355-6248 TEST FIXTURE 4910-00-764-5626 YA-396 38 F REMOVER, INJECTOR: USED TO REMOVE INJECTOR ASSEMBLY FROM CYLINDER HEAD 5120-00-219-8400 10881891 39 H REAMER: USED TO CLEAN FLAT PORTION OF INJECTOR NUT SPRAY TIP SEAT 5110-00-019-5240 10881903 40 H REAMER, SECOND OPERATION: USED TO CLEAN INJECTOR COPPER TUBE 5110-00-294-4606 10881907 41 H REAMER, USED TO REAM CARBON FROM INJECTOR SPRAY TIP 5110-00-219-8399 5344968 42 H REAMER, FIRST OPERATION: USED TO CLEAN INJECTOR TUBE 5110-00-785-1016 10881897 43 H REMOVER, SPRAY TIP: USED TO REMOVE SPRAY TIP FROM INJECTOR NUT 5120-00-355-6167 10919988 44 H REFINISHER, INJECTOR TUBE TIP: USED TO FACE SMALL END OF INJECTOR TUBE 5120-00-785-1017 10881902 45 H GAUGE: USED TO TIME INJECTOR 5220-00-387-9581 10881887 46 F WRENCH: USED TO TORQUE FUEL LINE NUTS 5120-00-019-5232 10881875 47 F GAUGE, FUEL PRESSURE: USED TO CHECK FUEL PUMP OUTPUT PRESSURE 6620-00-671-4509 10934455 48 H INSTALLING HOOK, BLOWER DRIVE CAM: USED TO INSTALL BLOWER DRIVE CAM IN SPRING 4910-00-591-6633 KM-J-5209 49 O WRENCH, OPEN END AND BOX: USED TO TORQUE FUEL RETURN LINE NUTS 5120-00-740-3347 10949344 50 O HOSE ASSEMBLY: USED TO DRAIN BOLT-ON FUEL TANK 4720-00-454-8608 11633323