TM-9-2350-261-20-4 Unit Maintenance Manual Volume 4 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 589 of 788
TM 9-2350-261-20-4 REPLACE CHEMICAL AGENT WIRING HARNESS (M113A2 ONLY) — Continued 0776 00 INSTALLATION 1. Connect main harness (1) to distribution box (2). 2. Secure main harness (1) to cradle (3) with clip (4). 3. Slide new locknut (5), new lockwasher (6), washer (7), and new bushing (8) on main harness (1). 4. Insert main harness (1) and bushing (8) through top. 5. Install washer insulator (9) washer (10), new lockwasher (11), and new locknut (12) on main harness (1) and bushing (8). 6. Install rubber bushing (13), packing (14), spring washer (15), and coupling nut (16) on main harness (1) and bushing (8). 7. Tighten locknut (5). 8. Install four shells (17) and slotted washers (18) on leads (19) and contacts (20). 9. Connect four leads (19) of main harness (1) to four leads (21) of extension harness (22). 10. Install extension harness (22) on detector bracket (23) with four screws (24) and nuts (25). 11. Install detector bracket (23) on hull with four screws (26) and washers (27). FOLLOW-THROUGH STEPS 1. Connect battery ground lead (WP 0294 00). END OF TASK 0776 00-3/4 blank