TM-9-2350-261-20-4 Unit Maintenance Manual Volume 4 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 567 of 788
TM 9-2350-261-20-4 REPLACE FIRE EXTINGUISHER AND MOUNT (M1059 ONLY) — Continued 0771 00 CLEAN, INSPECT, AND REPAIR 1. Inspect fire extinguisher trigger seal (11) and cap indicator (12). If cap indicator is extended or seal wire is broken, notify supervisor. INSTALLATION 1. Install lanyard (10) with pin (1) attached on strap (2) with screw (7), washer (8), and new locknut (9). 2. Install mount (6) on hull. Secure with four screws (4) and washers (5). 3. Place fire extinguisher (3) in mount (6). Secure with strap (2). 4. Install pin (1) in strap (2). END OF TASK 0771 00-3/4 blank