TM-9-2350-261-20-4 Unit Maintenance Manual Volume 4 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 517 of 788
TM 9-2350-261-20-4 REPLACE CABLE W124 (M1068 ONLY) 0757 00 THIS WORK PACKAGE COVERS: Removal (page 0757 00-1). Installation (page 0757 00-3). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s Electronic Equipment Tool Kit (WP 0780 00, Item 81) M a t e r i a l s / P a r t s Locknut (2) Tie strap (6) P e r s o n n e l R e q u i r e d Signal Support System Specialist 31U10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Battery ground lead disconnected (WP 0294 00) REMOVAL 1. Disconnect cable W124 plug P1 (1) from Data Panel Assembly A12 jack J3 (2). 2. Remove two screws (3), locknuts (4), clamps (5), and four washers (6) from APIU rack (7). Discard locknuts. 3. Remove screw (8), clamp (9), and clamp (10) from weldnut (11). 4. Remove four screws (12) and clamps (13) from cables (14) and weldnuts (15). 5. Remove three tie straps (16) from cables (14). Discard tie straps. 6. Remove three tie straps (17) from cables (14). Discard tie straps. 0757 00-1