TM-9-2350-261-20-4 Unit Maintenance Manual Volume 4 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 495 of 788
TM 9-2350-261-20-4 REPLACE HARNESS W32 (M1068 ONLY) 0749 00 THIS WORK PACKAGE COVERS: Removal (page 0749 00-1). Installation (page 0749 00-3). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0780 00, Item 29) M a t e r i a l s / P a r t s Tie strap (11) P e r s o n n e l R e q u i r e d Power-Generation Equipment Repairer 52D10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Disconnect all external power (TM 11-7010-256-12&P) Battery ground lead disconnected (WP 0294 00) REMOVAL 1. Remove screw (1) and clamp (2) from W32 harness (3) and weldnut (4). 2. Remove three screws (5) and clamps (6) from W32 harness (3) and weldnuts (7). 3. Remove six tie straps (8) from W32 harness (3). Discard tie straps. 4. Disconnect W32 harness plug P6 (9) from tent interface panel box A5 jack J7 (10). 5. Disconnect W32 harness plug P7 (11) from tent interface panel box A5 jack J8 (12). 6. Disconnect W32 harness plug P8 (13) from tent interface panel box A5 jack J10 (14). 7. Disconnect W32 harness plug P9 (15) from tent interface panel box A5 jack J9 (16). 0749 00-1