TM-9-2350-261-20-4 Unit Maintenance Manual Volume 4 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 488 of 788
TM 9-2350-261-20-4 REPLACE CASCADE REMOTE HARNESS (M1068 ONLY) — Continued 0745 00 INSTALLATION 1. Install RP1 harness (1), four screws (2), and new locknuts (3) on faceplate (4). Route RP1 harness leads down through power enclosure (5) and behind inverter housing A2 to front face of inverters. Avoid interfering with other components in power enclosure. 2. Lift faceplate (4) in place and install ten new lockwashers (6) and screws (7). 3. Connect RP1 harness (1) to front of inverters (8). Tighten captive screws on connectors. 4. Install faceplate (9) on front of inverter housing A2 (10) with ten new lockwashers (11) and screws (12). FOLLOW-THROUGH STEPS 1. Connect battery ground lead (WP 0294 00). END OF TASK 0745 00-2