TM-9-2350-261-20-4 Unit Maintenance Manual Volume 4 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 478 of 788
TM 9-2350-261-20-4 REPLACE/REPAIR INVERTER AC CABLE (W5) (M1068 ONLY) — Continued 0741 00 REMOVAL NOTE Tag all cables and leads before removal. 1. Disconnect cable W5 P6 (1) from power control box A1 jack J27 (2). 2. Remove faceplate (3) on inverter housing A2 (4) by removing ten screws (5) and lockwashers (6). Discard lockwashers. 3. Remove opposite end of W5 by disconnecting five terminals E1 through E5 (7) from inverter terminal block TB2 (8). Remove five screws (9). 4. Remove harness W5 from inverter housing A2 (4) by pulling the harness through the back of housing. Remove harness from carrier. 0741 00-2