TM-9-2350-261-20-4 Unit Maintenance Manual Volume 4 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 475 of 788
TM 9-2350-261-20-4 REPLACE DC BATTERY CABLE (W4) (M1068 ONLY) — Continued 0740 00 INSTALLATION 1. Install W4 cable in carrier. 2. Install circuit ground lead 32 (1) to post G3 (2) on carrier hull. Secure with new lockwasher (3) and screw (4). 3. Connect cable W4 P1 (5) to power control box jack J25 (6). 4. Route cable through six clamps (7). Secure with six screws (8). 5. Secure cable with eight new tie straps (9). 6. Connect cable W4 E2 to positive battery terminal (10) with screw (11) and nut (12). FOLLOW-THROUGH STEPS 1. Connect battery ground lead (WP 0294 00). 2. Turn MASTER SWITCH to ON (see your -10). Check that electrical system works properly. See TM 11-7010-256-12&P. 3. Turn MASTER SWITCH to OFF (see your -10). END OF TASK 0740 00-3/4 blank