TM-9-2350-261-20-4 Unit Maintenance Manual Volume 4 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 472 of 788
TM 9-2350-261-20-4 REPLACE POWER DISTRIBUTION CABLE (W3) (M1068 ONLY) — Continued 0739 00 INSTALLATION 1. Install new W3 cable (1) in carrier. 2. Connect cable W3 plug P1 (1) to jack J1 (2) on power distribution box A3 (3). 3. Install four clamps (4) on cable W3 and secure to hull weldnuts with screws (5). 4. Install six new tie straps (6) on cable W3. 5. Connect cable W3 plug P3 (7) to jack J24 (8) on power distribution enclosure A1 (9). FOLLOW-THROUGH STEPS 1. Connect battery ground lead (WP 0294 00). 2. Turn MASTER SWITCH to ON (see your -10). Check that electrical system works properly. See TM 11-7010-256-12&P. 3. Turn MASTER SWITCH to OFF (see your -10). END OF TASK 0739 00-2