TM-9-2350-261-20-4 Unit Maintenance Manual Volume 4 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 46 of 788
REPLACE ELECTRONIC EQUIPMENT HEATER CONTROL BOX-TO-FUEL PUMP LEAD (M577A2 ONLY) — Continued REMOVAL 1. Disconnect circuit 402A lead (1) from wiring harness lead (2). 2. Disconnect circuit 402A lead (1) from fuel pump lead (3). 3. Remove five screws (4) clamps (5), and lead (1) from forward bulkhead weldnuts. 4. Remove ten clips (6) and lead (1) from compartment roof cradles. 5. Remove six clips (7) and lead (1) from rear bulkhead cradles. 6. Remove two screws (8), clamps (9), and lead (1) from floor weldnuts. 7. Remove five clamps (5) and two clamps (9) from lead (1). Remove lead from carrier. 0632 00-2 0632 00 TM 9-2350-261-20-4