TM-9-2350-261-20-4 Unit Maintenance Manual Volume 4 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 447 of 788
TM 9-2350-261-20-4 REPLACE POWER CONTROL ENCLOSURE ASSEMBLY A1 (M1068 ONLY) 0731 00 THIS WORK PACKAGE COVERS: Removal (page 0731 00-1). Installation (page 0731 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0780 00, Item 29) M a t e r i a l s / P a r t s Lockwasher (2) P e r s o n n e l R e q u i r e d Power-Generation Equipment Repairer 52D10 Helper (H) E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) All external power disconnected (TM 11-7010-256- 12&P) Battery ground lead disconnected (WP 0294 00) Roadside data panel A13 removed (WP 0727 00) Cascade remote harness W15 removed (WP 0745 00) REMOVAL 1. Remove two screws (1), lockwashers (2), and bracket (3) from power control enclosure (4). Discard lockwashers. NOTE Tag all cables/connectors before removal for proper installation later. 2. Disconnect all cables/connectors (5) from left and right sides of power control enclosure (4). 3. Remove eight screws (6), washers (7), and power control enclosure (4) from inverter housing (8). Have helper assist. 0731 00-1