TM-9-2350-261-20-4 Unit Maintenance Manual Volume 4 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 438 of 788
TM 9-2350-261-20-4 REPAIR POWER CONTROL ENCLOSURE FACEPLATE AND BRACKET (M1068 ONLY) — Continued 0730 00 NOTE Tag all leads before removal. There are 12 circuit breakers. All circuit breakers are removed in the same way. The art work shows the removal of only one circuit breaker. Use wiring diagram (see FO-7). 5. Remove nut (1) and safety cover (2) from terminal 1 of circuit breaker CB1 (3). Unwrap velcro strap (4) from around local wiring. 6. Remove two nuts (5) and lockwashers (6) from circuit breaker CB1 (3). 7. Remove circuit 7A lead (7) from terminal 1 of circuit breaker CB1 (3). 8. Remove circuits 9A, 9E, and 9D leads (8) from terminal 2 of circuit breaker CB1 (3). 9. Remove two screws (9), lockwashers (10), and circuit breaker CB1 (3) from faceplate (11). Discard lockwashers. 10. Remove two nuts (12) and lockwashers (13) from circuit breaker CB2 (14). 11. Remove circuit 31B lead (15) from terminal 1 of circuit breaker CB2 (14). 12. Remove circuit 36C lead (16) from terminal 2 of circuit breaker CB2 (14). 13. Remove four screws (17), lockwashers (18), and circuit breaker CB2 (14) from faceplate (11). Discard lockwashers. 14. Remove four screws (19), locknuts (20), and cascade remote harness RP1 (21) from faceplate (11) and two inverters. Discard locknuts. 0730 00-2