TM-9-2350-261-20-4 Unit Maintenance Manual Volume 4 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 43 of 788
TM 9-2350-261-20-4 REPLACE ELECTRONIC EQUIPMENT HEATER BATTERY-TO-CONTROL BOX LEAD (M577A2 ONLY) — Continued 0631 00 4. Install heater in carrier (WP 0633 00). 5. Connect lead (3) to control box lead (10). 6. Secure lead (3) to circuit 6 lead (11) with two straps (12). 7. Install new grommet (13) and lead (3) in battery box (14). 8. Install lead (3) on front battery positive terminal (15). Secure with nut (16). FOLLOW-THROUGH STEPS 1. Connect battery ground lead (WP 0294 00). 2. Start heater (see your -10). Check that circuit 400A lead is installed properly. Turn heater off. END OF TASK 0631 00-3/4 blank