TM-9-2350-261-20-4 Unit Maintenance Manual Volume 4 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 388 of 788
TM 9-2350-261-20-4 REPLACE SMOKE GENERATOR GLOW PLUG CABLE ASSEMBLIES (M1059 ONLY) — Continued 0714 00 INSTALLATION NOTE There are two exterior cables, access plates, and smoke generators, left and right. Cables are installed on carrierthe same way. O nly one ext erior cable, access plate, and smoke generator i s shown. Remove cables as required. 1. Install interior cable (1), four screws (2), and new locknuts (3) to right access plate (4). 2. Connect exterior cable (5) to preheat harness jack (6) on panel (7) of right smoke generator (8). 3. Connect exterior cable (5) to interior cable (1) in right access plate (4). 4. Install interior cable (1), four screws (2), and new locknuts (3) to left access plate (4). 5. Connect exterior cable (5) to interior cable (1) in left access plate (4). 6. Connect exterior cable (5) to preheat harness jack (6) on panel (7) of left smoke generator (8). 0714 00-4