Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-261-20-4 Unit Maintenance Manual Volume 4 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download

Page 338 of 788

TM 9-2350-261-20-4 REPLACE SMOKE GENERATOR INTERNAL CABLE ASSEMBLY (M1059 ONLY) — Continued 0702 00 REMOVAL WARNING Before you do any maintenance, discharge all capacitors to ground or electrical shock could injure personnel. NOTE Left and right cable assemblies are replaced the same way, except left side cable assembly has six clamps and right side has only one. Left side is shown. 1. Disconnect cable (5) from jack 1J3 (left) (7) or 1J4 (right) (12) on back of control panel (8). 2. Remove six screws (10), lockwashers (11), clamps (9), and cable (5) from hull. Discard lockwashers. 3. Remove connector (1) attached to cable (5) through access plate (4). 4. Remove four screws (2), dust cap (3), locknuts (6), and cable (5) from access plate (4). Discard locknuts. 0702 00-2