TM-9-2350-261-20-4 Unit Maintenance Manual Volume 4 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 314 of 788
TM 9-2350-261-20-4 REPLACE SMOKE GENERATOR ASSEMBLY AND SUPPORT BRACKET (M1059 ONLY) — Continued 0697 00 REMOVAL WARNING Before you do any maintenance, discharge all capacitors to ground or electrical shock could injure personnel. 1. Remove two screws (1), four washers (2), two locknuts (3), and wedges (4) from support bracket (5) and generator (6). Discard locknuts. 2. Slide generator (6) out and onto shield. Have helper assist. 3. Disconnect electrical cable assembly (7) from cover assembly connector 5J1 (8). WARNING Compressed air pressure from smoke generator can cause serious injury or death. To avoid accidents, bleed air before working on air compressor assembly or disconnecting any air hose. 4. Disconnect air hose (9) from cover assembly connector (10). 5. Disconnect fog oil hose (11) from cover assembly connector (12). 0697 00-2