TM-9-2350-261-20-4 Unit Maintenance Manual Volume 4 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 247 of 788
TM 9-2350-261-20-4 REPLACE M13 NBC HEATER HOSES (M1068 ONLY) — Continued 0682 00 INSTALLATION 1. Install rear operator’s inlet hose (14) and two clamps (18) on rear operator’s heater (4) and manifold (19). Tighten clamps. 2. Install two clamps (17) on rear operator’s inlet hose (14) Secure clamps on sponson with two screws (15) and new lockwashers (16). 3. Secure electrical leads to rear operator’s inlet hose (14) with new tie straps (13). 4. If bracket (9) was removed, install bracket on table supports with four screws (10), washers (11), and new lockwashers (12). 5. If either bracket (5) was removed, install bracket (5) on bracket (9) with two screws (6), washers (7), and new locknuts (8). 6. Install rear operator’s outlet hose (2) and two clamps (1) on connector (3) and rear operator’s heater (4). Tighten clamps. 0682 00-5