TM-9-2350-261-20-4 Unit Maintenance Manual Volume 4 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 240 of 788
TM 9-2350-261-20-4 REPLACE M13 NBC FILTERS AND HOSES (M1068 ONLY) — Continued 0681 00 INSTALLATION 1. Install manifold (1) on sponson. Secure with new two new lockwashers (2), washers (3), and screws (4). 2. Install four heater inlet hoses (5) and clamps (6) on manifold (1). Tighten clamps. 3. If removed, install new grommet (7) on hose (8). Route hose through hull and insert grommet in hull. 4. Install hose (8) and clamp (9) on manifold (1). Tighten clamp. 5. Install two clamps (10) on hose (8). Secure clamps and hose to hull with two screws (11). 6. Secure two personnel heater fuel lines (12) to hose (8) with new tie strap (13). 7. Install manifold (14) on sponson. Secure with two washers (15), new lockwashers (16), and screws (17). 8. Install hose (8) and clamp (18) on manifold (14). Tighten clamp. 9. If removed, install clamps (19), straight pins (20), and new cotter pins (21) on bracket (22). 0681 00-4