TM-9-2350-261-20-4 Unit Maintenance Manual Volume 4 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 184 of 788
TM 9-2350-261-20-4 REPLACE M13 NBC HEATER WIRING HARNESS (M577A2 ONLY) — Continued 0670 00 8. Install cable connector (1) on air purifier (2). 9. Install forked end of ground lead (3) on cable connector (1) and tighten screw on cable connector. NOTE To ensure proper grounding, remove any paint from frame at ground point. 10. Install ground lead (3), screw (4), two washers (5), and new locknut (6) on panel (7). 11. Install new tie strap (8)on grou nd lead (3) and wiring harn ess (9). 12. In driver’s compartment, install four clamps (10) on cable (11) and wiring harness (9). 13. Install four screws (12), new lockwashers (13), and four clamps (10) on weldnuts. 14. Connect wiring harness (9) to control box (14). 15. Install ground lead (15), two new lockwashers (16), and screw (17) on control box (14). 16. Install new tie straps (18) along cable (11) and adjacent wiring harness (9). FOLLOW-THROUGH STEPS 1. Connect battery ground lead (WP 0294 00). END OF TASK 0670 00-4