TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 92 of 936
TM 9-2350-261-20-3 REPLACE FLOOR PLATES (M901A1 ONLY) — Continued 0441 00 NOTE When installing floor plates in the M901A1, make sure electrical cables are not pinched or damaged. 6. Position floor plates (2) and (3) on vehicle structural supports. Have helper assist. 7. Secure floor plates (2) and (3) to vehicle structural supports with seven lined washers (4), washers (5), and screws (6). 8. Install floor plate (7) on vehicle structural supports. Secure with six lined washers (4), washers (5), and screws (6). 9. Install two platform protectors (8) on floor plates (2) and (3). Secure with four flat washers (9) and screws (10). 10. Install access cover (11) on platform assembly (12). Secure with two washers (13) and screws (14). FOLLOW-THROUGH STEPS 1. Install personnel heater duct and hose (WP 0617 00). 2. Raise and lock ramp (see your -10). END OF TASK 0441 00-6