TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 835 of 936
TM 9-2350-261-20-3 REPLACE HEATER AIR INTAKE AND EXHAUST PIPES (M1064 ONLY) 0623 00 THIS WORK PACKAGE COVERS: Removal (page 0623 00-1). Installation (page 0623 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0780 00, Item 29) M a t e r i a l s / P a r t s Gasket (2) P e r s o n n e l R e q u i r e d Unit Mechanic E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Ramp lowered (see your -10) Battery ground strap disconnected (WP 0294 00) Heater assembly removed (WP 0621 00) REMOVAL 1. Remove air intake pipe (1) from intake elbow (2). 2. Loosen two nuts (3) on U-bolt (4), and remove exhaust pipe (5) and clamp (6) from exhaust elbow (7). 3. Remove six screws (8), intake elbow (2), exhaust elbow (7), and two gaskets (9) from carrier top deck. Discard gaskets. 0623 00-1