TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 82 of 936
TM 9-2350-261-20-3 REPLACE DRIVER’S COMPARTMENT HULL ACCESS COVERS — Continued 0439 00 CLEAN, INSPECT, AND REPAIR 1. Clean access covers and hull mating surface with cleaning compound. INSTALLATION WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 1. Apply sealing compound to hull mating surface of access covers. 2. Install rear access cover (4). Secure with eight washers (2) and screws (1). 3. Install forward access cover (3). Secure with nine washers (2) and screws (1). END OF TASK 0439 00-2