TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 811 of 936
TM 9-2350-261-20-3 REPLACE PERSONNEL HEATER DUCT AND HOSES — Continued 0617 00 INSTALLATION 1. Align duct (5), three insulator washers (9), and shield (8) with holes in carrier floor. Secure with three washers (7) and screws (6). 2. Install nipple (3) in duct (5) and nipple (3) in duct (4). Secure with latch on each nipple. 3. Install two clamps (1) on hose (2). Secure hose in two nipples (3) with clamps. FOLLOW-THROUGH STEPS 1. Start engine (see your -10). 2. Raise and lock ramp (see your -10). 3. Stop engine (see your -10). END OF TASK 0617 00-3/4 blank