TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 804 of 936
TM 9-2350-261-20-3 REPLACE FUEL SHUTOFF VALVE ASSEMBLY (M113A2 AND M1059 ONLY) — Continued 0615 00 INSTALLATION WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 1. Apply thin layer of sealing compound to external tapered threads. 2. Install new preformed packing (5), adapter (4), and shutoff valve (3) on heater fuel filter (6). 3. Install inlet elbow (2) on shutoff valve (3). 4. Install fuel filter supply hose (1) on adapter (2). FOLLOW-THROUGH STEPS 1. Open heater fuel shutoff valve (see your -10). 2. Bleed air from fuel lines (WP 0599 00). 3. Turn heater ON (see your -10). Check for proper operation and leaks. 4. Turn heater OFF (see your -10). END OF TASK 0615 00-2