TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 80 of 936
REPLACE FLOOR PLATES (M1059 ONLY) — Continued 2. Place two front floor plates (8) and (9) on hull crossmembers. 3. Place two rear floor plates (10) and (11) on hull crossmembers. 4. Install two washers (12) and screws (13) on front floor plates (8) and (9). 5. Install 12 lined washers (14) and screws (15) on front floor plates (8) and (9), and rear floor plates (10) and (11). FOLLOW-THROUGH STEPS 1. Install personnel floor heater duct (WP 0617 00). 2. Unstow seats (see your -10). 3. Raise and lock ramp (see your -10). END OF TASK 0438 00-4 0438 00 TM 9-2350-261-20-3 1. If pads (1) through (5), rubber strips (6), or seals (7) were removed, apply light coat of adhesive to all crossmember mating surfaces. Allow surfaces to become sticky. Install pads, rubber strips, and seals on crossmembers and press surfaces firmly together.