TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 777 of 936
TM 9-2350-261-20-3 REPLACE FUEL TANK TO FUEL PUMP HOSE (M577A2 AND M1068 ONLY) — Continued 0610 00 INSTALLATION WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 1. Apply light coat of sealing compound to all external tapered threads. Do not apply sealant beyond small end of external tapered threads. NOTE Flareless (compression) fittings are used on the fuel lines. When these fittings are first installed, a sleeve is crimped on the tube or hose end. Consequently, when tubes or hoses are replaced, new fitting sleeves are also required. 2. If necessary, install nipple (5) in fuel cross pipe. 3. Install shutoff valve (3) on nipple (5). 4. Install two adapters (2) on fuel pump (4) and shutoff valve (3). 5. Install fuel hose (1) on two adapters (2). 0610 00-3