TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 74 of 936
TM 9-2350-261-20-3 REPLACE FLOOR PLATES (M1064 ONLY) — Continued 0437 00 REMOVAL 1. Remove screw (1) and washer (2) from guard (3). 2. Remove screw (4), washer (5), locknut (6), and guard (3) from hull. Discard locknut. 3. Remove eight eyebolts (7), one screw (8), and nine lined washers (9) from right front floor plate (10) and left front floor plate (11). 4. Remove two screws (12), lined washers (13), and rear floor plate (14) from carrier. 5. Remove two locknuts (15), washers (16), screws (17), and guard (18) from rear floor plate (14). Discard locknuts. 6. If necessary, remove two pads (19), three pads (20), and pad (21) from front crossmembers by scraping. 7. If necessary, remove two pads (22) and (23) and three seals (24) and (25) from crossmembers by scraping. 0437 00-2