TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 687 of 936
TM 9-2350-261-20-3 REPLACE BULKHEAD CONNECTION TO RAMP CYLINDER HOSE — Continued 0590 00 FOLLOW-THROUGH STEPS 1. Check fluid level in tank. Add fluid as needed (see your -10). WARNING Wearing loose clothing around moving parts can allow personnel to get caught and could result in injury or death. Tuck in loose clothing. WARNING An inoperable/unsafe ramp can fall and kill soldiers. Seal off area behind ramp during testing and bleeding of hydraulic lines. 2. Start engine (see your -10). 3. Raise and lower ramp several times to bleed air from system (see your -10). Check for hydraulic leaks. 4. Install power plant rear access panel (WP 0431 00 or WP 0433 00). 5. Install floor plates (WP 0436 00, WP 0437 00, WP 0438 00, or WP 0441 00). 6. Raise and lock ramp (see your -10). 7 . Stop/shu tdow n e ngine (see you r -1 0). END OF TASK 0590 00-5/6 blank