TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 622 of 936
TM 9-2350-261-20-3 RAISE/LOWER INOPERABLE/UNSAFE RAMP — Continued 0579 00 a. WARNING! Do not work behind an inoperable/unsafe ramp that is not secured. Use lifting device to make sure ramp cannot fall while cable is being secured to tow pintle. NOTE Steps 11 - 14 apply to M577A2 and M1068 only. 11. With ramp lock engaged and lifting equipment holding ramp up, install tow hook (2), headed pin (3), and safety clip (4) in rear left hand lifting eye (5), and rear right hand towing eye (6). 12. Route tow cable (7) through tow pintle (8). Connect ends of tow cable to lifting eye (5) and towing eye (6), and secure with two tow hooks (2), headed pins (3), and safety clips (4). 13. Post warning sign (9) on ramp (10) with the following warning. a. WARNING! This inoperable/unsafe ramp can fall and kill you. Do not remove any cable unless proper lifting equipment is attached. 0579 00-4 10. Tag driver’s ramp lock lever (1) inside carrier with the following warning sign: