TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 611 of 936
TM 9-2350-261-20-3 REPLACE SMOKE GRENADE LAUNCHER WIRING HARNESS (M113A2, M1059, AND M901A1 ONLY) — Continued 0577 00 9. Install wiring harness (12) and main wiring harness (13) in four cradles (18). Secure with four clips (17). 10. Install wiring harness (12) and main wiring harness (13) in cradle (18). Secure with clip (19). 11. Install clamp (12) on wiring harness (15). Secure clamp (15) and main wiring harness clamp (16) to hull with screw (14). 12. Install two clamps (11) on wiring harness (12) and main wiring harness (13). Secure clamps to hull with two screws (9) and new lockwashers (10). 13. If removed, install plate (5) on bulkhead with four screws (6), washers (7), and new locknuts (8). 14. Secure harness connector (4) to bulkhead with four screws (2), washers (3), and new locknuts (1). 0577 00-9