TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 606 of 936
TM 9-2350-261-20-3 REPLACE SMOKE GRENADE LAUNCHER WIRING HARNESS (M113A2, M1059, AND M901A1 ONLY) — Continued 0577 00 12. Remove four locknuts (1), screws (2), washers (3), and harness connector (4) from driver’s compartment bulkhead. Have helper assist. Discard locknuts. 13. Inspect plate (5) on bulkhead. If defective, remove four screws (6), washers (7), and locknuts (8). Discard locknuts. 14. Remove two screws (9), lockwashers (10), and clamps (11) from front hull inside driver’s compartment. Remove wiring harness (12) and main wiring harness (13) from clamps. Discard lockwashers. 15. Remove screw (14), clamp (15), and main wiring harness clamp (16) from front hull. Remove wiring harness (12) from clamp (15). 16. Remove cradle clip (17), wiring harness (12), and main wiring harness (13) from cradle (18) on front hull. 17. Remove four cradle clips (19), wiring harness (12), and main wiring harness (13) from four cradle (18). 0577 00-4