TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 580 of 936
TM 9-2350-261-20-3 REPLACE RAMP SEAL — Continued 0570 00 INSTALLATION NOTE Trim seal to fit. 1. Place lower seal (4) on rear bulkhead. Bend three retaining strips (3) down on seal to secure in place. 2. Place upper seal (2) on rear bulkhead. Bend retaining strip (1) down on seal to secure in place. FOLLOW-THROUGH STEPS 1. Start engine (see your -10). 2. Perform ramp seal chalk test (WP 0556 00). 3. Stop engine (see your -10). END OF TASK 0570 00-2