TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 58 of 936
TM 9-2350-261-20-3 REPLACE POWER PLANT REAR ACCESS PANELS (M113A2 AND M901A1 ONLY) — Continued 0431 00 INSTALLATION 1. Install support (1) on hull. Secure with four screws (2) and new locknuts (3). 2. Install cover (4) on hull. Secure with two screws (5) and new locknuts (6). 3. Install seven spacers (7) on hull. Secure with seven screws (8). 4. Install seven clamps (9), washers (10), T-bolts (11), and new cotter pins (12) in hull. 5. If removed, install new seals (13) and (14) on panels (15) and (16). Bend seal supports to secure seals to panels. 6. Install panels (15) and (16) on hull. Tighten seven clamps (9) and T-bolts (11). 7. Use chalk test (WP 0120 00) to ensure panel seals hull opening to prevent carbon monoxide leaks. FOLLOW-THROUGH STEPS 1. Inst all personnel heater duct (WP 0617 00). END OF TASK 0431 00-2