TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 563 of 936
TM 9-2350-261-20-3 REPLACE WIRE ROPE AND PULLEYS (ALL EXCEPT M1064) 0564 00 THIS WORK PACKAGE COVERS: Removal (page 0564 00-1). Installation (page 0564 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0780 00, Item 29) M a t e r i a l s / P a r t s Cotter pin (3) Spring pin P e r s o n n e l R e q u i r e d Unit Mechanic E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Ramp lowered (see your -10) Rear floor plate removed (WP 0436 00) Wire rope disconnected from ramp cylinder (WP 0593 00) REMOVAL 1. Remove spring pin (1), two washers (2), and guard (3) from upper pulley mount. Discard spring pin. 2. Remove cotter pin (4), headed pin (5), and wire rope (6) from ramp mount bracket. Discard cotter pin. 3. Remove two cotter pins (7), headed pins (8), and pulleys (9) from pulley mount. Discard cotter pins. 4. Remove wire rope (6) from carrier. 0564 00-1