TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 561 of 936
TM 9-2350-261-20-3 REPLACE RAMP LINKAGE (M577A2 AND M1068 ONLY) — Continued 0563 00 15. Align clevis (24) with arm (3). Secure with headed pin (25) and new cotter pin (26). 16. Tighten all locknuts. 17. Adjust ramp lock (WP 0561 00). FOLLOW-THROUGH STEPS WARNING Falling ramp could cause severe injuries. Keep personnel clear of ramp area. 1. Start engine (see your -10). 2. Raise and lock ramp (see your -10). Check that ramp lever and cable operate properly. 3. Stop engine (see your -10). END OF TASK 0563 00-5/6 blank