TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 56 of 936
TM 9-2350-261-20-3 REPLACE DRIVER’S POWER PLANT ACCESS PANEL — Continued 0430 00 INSTALLATION 1. Install four washers (1) on hull. Secure with four screws (2). 2. Install four clamps (3), washers (4), T-bolts (5), and new cotter pins (6). 3. If new seal (7) is needed, install on panel (8). Bend support to secure seal to panel. 4. Install driver’s access panel (8) in hull. Secure by tightening four T-bolts (5) and clamps (3). 5. Perform chalk test (WP 0120 00) to ensure that panel seals hull opening to prevent carbon monoxide leaks. END OF TASK 0430 00-2