TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 558 of 936
TM 9-2350-261-20-3 REPLACE RAMP LINKAGE (M577A2 AND M1068 ONLY) — Continued 0563 00 REMOVAL WARNING Falling ramp could cause severe injuries. Keep personnel clear of ramp area. 1. Remove cotter pin (1), headed pin (2), and clevis (3) from arm (4). Discard cotter pin. 2. Remove cotter pin (5), headed pin (6), and clevis (7) from lever (8). Discard cotter pin. 3. Remove two cotter pins (9), headed pins (10), and eyebolts (11) from arms (12) and (13). Discard cotter pins. 4. Remove eyebolt (11) from clevis (7). 5. Loosen two locknuts (14). Remove two adjusting screws (15) and locknuts from two hull brackets (16). Discard locknuts. 6. Remove eight screws (17), key washers (18), and four supports (19) with arm assembly from hull top plate. Discard key washers. 7. Remove locknut (20) and screw (21) from arm (4). Discard locknut. 8. Remove two screws (22) from connector (23). 9. Remove arm (12) from connector (23) and key (24) from arm. 0563 00-2